ConforteckX-Treme Electronic Controller

Description

• 1. “DOWN” buttons (blue) to lower the power level.
  2. “UP” buttons (red) to increase the power level.
  3. Digital display: shows the power level (turns off 10 seconds after the last change) and error messages. The dot indicates whether the power supply is adequate.
  4. Indicator lights between the buttons. They only light up if the equipment is working properly.
  5. “-” and “+” indicator lights below the buttons for easy location of controls in the dark.
  6. ConforTeck™ X-Treme™ controlled outputs. DC 2.5 x 5.5mm type sockets. For resistive heating equipment up to 95 watts at 13.8 Volts DC.
  7. X-Treme™ power plug. Plug into a DC 2.5 x 5.5mm socket supplying 12 Volts DC.
  8. ConforTeck™-labeled lanyard for wearing your X-Treme™ around your neck (not shown).
• Device maintenance
  Check occasionally that your connections are clean and free of ice, moisture, and oxidation.
  IMPORTANT: Apply an antioxidant lubricant (dielectric grease) to the connector plugs. 
  Do not use harsh chemicals to clean your X-Treme™. A simple damp cloth will do the trick.

Technical specifications of the device

• Electrical
  Operating voltage: 8 to 16 volts DC.
  Short-circuit protection through detection and deactivation of the output.
  Automatic backup: your ConforTeck™ X-Treme™ stores the last power setting in memory for 10 seconds after the last change.
  Output can control up to 95 watts of power at 13.8 volts DC.
• Mechanical
  Height 25 mm (0.984")
  Width 52 mm (2.047“)
  Length 110 mm (4.331”)
  Weight 128 g (0.2 lb)
• Environmental
  Operating temperature: -40°C to +70°C
  Relative humidity: 0 to 95% non-condensing
• Model: 02-CTXME.